Home Improvement Tips

How to Perform a Water Damage Inspection

746 0
How to Perform a Water Damage Inspection

There are a number of ways to carry out a water damage inspection in your home, but the easiest is a visual search for stains, discolorations, distortions or any mixing of the three. These signs can show up on the walls, ceilings or floors of your home. Visual indications can warn of mild to severe water damage that can be expensive to repair, depending on the amount of damage.

Further suggestions of water damage can include uncommon musty smells from mould or mildew, dark stains on grouting between tiles, any warped or cracked surfaces and soft spots on what were otherwise solid areas. Frequently, discolorations on walls or a ceiling can be caused by water, which will then carry things like dye, dirt or chemicals from the exterior of your house through to the visible interior surface. If you’ve experienced domestic flood damage in Harrow, contact an experienced, affordable and trustworthy service to assist you in getting your home ship shape again.


The first thing to do in identifying the cause is to check out the attic or the roof of your home for any holes, cracks or missing roof parts. Then carry on your water damage inspection by looking for any signs of warping, cracking or stains to wood panelling, fixtures, window frames or drawers/cabinets. These signs usually point to the two most universal causes of water damage: leaking/broken pipes or damaged and poorly fitted windows.

You may also find more signs in bathrooms, kitchens or any other room with a sink, taps and water fixtures. Look for dark brown that can discolour the grouting and sealant between tiles or where the fixtures are attached to walls or counters. These kind of discolorations are normally only indications that a deeper water damage examination may be necessary to uncover any problems in the walls and floor around the sink, bathtub or toilet. This damage may not be visible to the naked eye but can deeply penetrate into the underlying drywall.

Basement Check

More signs may be apparent in the basement, which should be the next place to check to finish your water damage inspection. Look for stained floors, mats and carpets, standing water and distorted or cracks in support beams and drywall. Any musty smells, cracks in the walls or floor and warped or rotting hard surfaces, such as wood or concrete, might just reveal further water saturation or damage to an area that you cannot inspect by yourself.

You should consult with water damage inspection professionals to find out the full extent of any damage. Experts in the business use specialised equipment that can detect precisely how much moisture is now in your home. The specialists will be able to confirm your research and tell you about any water damage that you are unable to see through your own self-inspection. Professionals can answer all questions, and offer you professional advice on how to avoid water damage in the future.

Make sure to contact experienced, trustworthy and affordable experts in the business today.